TailplateTailplate
Run a report

Airworthiness Directive 05-20780

recurring
AD 05-20780 · 2005-10-21 · turbine engine

Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG (Formerly Rolls-Royce Deutschland GmbH, formerly BMW Rolls-Royce GmbH) Models BR700-710A1-10 and BR700-710A2-20 Turbofan Engines

What this AD requires

The FAA is superseding an existing airworthiness directive (AD) for Rolls-Royce Deutschland Ltd & Co KG (RRD) (formerly Rolls- Royce Deutschland GmbH, formerly BMW Rolls-Royce GmbH) models BR700- 710A1-10 and BR700-710A2-20 turbofan engines. That AD currently requires initial and repetitive visual and ultrasonic inspections of fan discs, part numbers (P/Ns) BRR18803, BRR19248, and BRR20791 for cracks, and if necessary, replacement with serviceable parts. This ad requires those same inspections for discs having old design P/N fan blades installed, and, extends the inspection interval for fan discs having new design P/N fan blades installed. Also, this AD adds as optional terminating action to the inspections, installation of certain P/N new fan discs, certain P/N new fan blades, and engine fan speed (N1) Keep Out Zone software. This AD results from a revised RRD service bulletin (SB) that introduces relaxed inspection intervals for certain P/N combinations of fan discs and fan blades, and introduces improved design fan discs and fan blades.

Repetitive inspection. Re-inspect every 550 hours. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 05-20780 applies to

MakesRolls-Royce Deutschland Ltd & Co KgRolls-Royce Deutschland GmbhBmw Rolls-Royce Gmbh
ModelsBR700-710A1-10, BR700-710A2-20, BR700

Whether AD 05-20780 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

Supersession

Supersedes AD 2003-07-11.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 05-20780 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.