Airworthiness Directive 05-20680
one-timeAirworthiness Directives; Bell Helicopter Textron Model 47D1, 47G, 47G-2, 47G-2A, 47G-2A-1, 47G-3, 47G-3B, 47G-3B-1, 47G-3B-2, 47G-3B-2A, 47G-4, 47G-4A, 47G-5, 47G-5A and Coastal Helicopters, Inc. Model OH-13H (Tomcat Mark 5A, 6B, 6C) Helicopters
What this AD requires
This amendment adopts a new airworthiness directive (AD) for Bell Helicopter Textron (Bell) Model 47D1, 47G, 47G-2, 47G-2A, 47G-2A- 1, 47G-3, 47G-3B, 47G-3B-1, 47G-3B-2, 47G-3B-2A, 47G-4, 47G-4A, 47G-5, 47G-5A and Coastal Helicopters, Inc. Model OH-13H (Tomcat Mark 5A, 6B, 6C) helicopters that have a certain scissors assembly or weld assembly scissors bracket installed. The AD requires, within 60 days, determining and recording the total hours time-in-service (TIS) for each Parts Manufacturer Approval (PMA)-produced scissors assembly and weld assembly scissors bracket and establishes a life limit for each affected part. This amendment is prompted by the need to establish a life limit on scissors assemblies and weld assembly scissors brackets produced under PMA No. PQ808SW or installed per Supplemental Type Certificate (STC) No. SH2772SW. The actions specified by this AD are intended to establish a life limit to prevent using a scissors assembly or weld assembly scissors bracket past it's life limit, which could result in failure of the part and subsequent loss of control of the helicopter.
Which aircraft AD 05-20680 applies to
Applies only to Bell Model 47D1/47G-series helicopters and Coastal Helicopters, Inc. (CHI) Model OH-13H (Tomcat Mark 5A, 6B, or 6C) helicopters with a Texas Helicopter Co., Inc. (THC) scissors assembly P/N 74-150-949-9 or 74-150-949-5 or 74-150-249-5M, or weld assembly scissors bracket P/N 74-150-117-13M, installed as a Parts Manufacturer Approval (PMA) replacement part or as part of the modification in accordance with STC No. SH2772SW. Certificated in any category.
Whether AD 05-20680 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.