Airworthiness Directive 05-19045
recurringAirworthiness Directives; Airbus Model A330-301, -321, -322, -341, and -342 Airplanes; and Model A340-200 and A340-300 Series Airplanes
What this AD requires
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Model A330-301, -321, -322, -341, and -342 airplanes; and Model A340-200 and A340-300 series airplanes. This AD requires repetitive inspections for cracks in the aft face of the rear spar at the area adjacent to the bolt holes and the end of the build slot, and repair if necessary. The AD also provides an optional terminating action for the repetitive inspections. This AD results from a report that, during fatigue tests of the wing, cracks were found in the vertical web of the rear spar between ribs 1 and 2 having initiated at the build slot. We are issuing this AD to detect and correct fatigue cracking in the vertical web of the wing rear spar, which could result in reduced structural integrity of the wing.
Which aircraft AD 05-19045 applies to
Whether AD 05-19045 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.