Airworthiness Directive 05-16457
one-timeAirworthiness Directives; Airbus Model A320-111 Airplanes and Model A320-200 Series Airplanes
What this AD requires
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Model A320-111 airplanes and Model A320-200 series airplanes. This AD requires doing a one-time general visual inspection of the axle nut on each main landing gear (MLG) wheel for the presence of locking bolts and associated hardware; doing any related investigative and corrective actions as applicable; and submitting an inspection report to the manufacturer. This AD results from a report that an axle nut had separated from an axle on a main landing gear (MLG) wheel, due to missing locking bolts. We are issuing this AD to detect and correct missing locking bolts on the axle nuts of the MLG wheels. Absence of the locking bolts could result in separation of a wheel(s) from the axle and consequent reduced controllability of the airplane during takeoff and landing, and possible injury to people on the ground.
Which aircraft AD 05-16457 applies to
Whether AD 05-16457 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.