Airworthiness Directive 04-5431

one-time
AD 04-5431 · 2004-03-15 · airframe

Airworthiness Directives; McDonnell Douglas Model DC-9-14, DC-9-15, and DC-9-15F Airplanes; Model DC-9-20, -30, -40, and -50 Series Airplanes; and Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83), DC-9-87 (MD-87), MD-88, and MD-90-30 Airplanes

What this AD requires

This amendment adopts a new airworthiness directive (AD), applicable to certain McDonnell Douglas airplane models, that requires inspection of the captain's and first officer's seat locking pins for minimum engagement with the detent holes in the seat tracks; inspection of the seat lockpins for excessive wear; and corrective actions, if necessary. This action is necessary to prevent uncommanded seat movement during takeoff and/or landing, which could result in interference with the operation of the airplane and consequent temporary loss of control of the airplane. This action is intended to address the identified unsafe condition.

Which aircraft AD 04-5431 applies to

ModelsDC-9-15, DC-9-81, DC-9-82, DC-9-83, DC-9-87, MD-88, MD-90-30

certain

Whether AD 04-5431 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of complianceThe specific action taken (inspected, replaced, modified) and to what revision.
DateWhen the work was done.
Aircraft timeTotal time in service / tach at compliance — how recurring next-due is computed.
Signature & certificateThe A&P/IA who returned it to service, with certificate number.
Is AD 04-5431 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.