Airworthiness Directive 04-24625
recurringAirworthiness Directives; Airbus Model A330, A340-200, and A340-300 Series Airplanes
What this AD requires
This amendment adopts a new airworthiness directive (AD), applicable to certain Airbus Model A330, A340-200, and A340-300 series airplanes. This AD requires repetitive inspections for evidence of corrosion and sheared attachment bolts of the sensor struts at flap track 4 on the left and right sides of the airplane; related investigative and corrective actions as necessary; and a terminating action for the repetitive inspections, by requiring the eventual replacement of all sensor struts with new, improved sensor struts that are less sensitive to corrosion. The actions specified by this AD are intended to prevent loss of the sensor strut function, resulting in the inability to detect flap drive disconnection at flap track stations 4 and 5, which could lead to separation of the outboard flap from the airplane, and consequent reduced controllability of the airplane. This action is intended to address the identified unsafe condition.
Which aircraft AD 04-24625 applies to
Whether AD 04-24625 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.