Airworthiness Directive 2004-21-08
recurringAirworthiness Directives; Cessna Aircraft Company Models 190, 195 (L-126A,B,C), 195A, and 195B Airplanes
What this AD requires
The FAA adopts a new airworthiness directive (AD) for all Cessna Aircraft Company (Cessna) Models 190, 195 (L-126A,B,C), 195A, and 195B airplanes that are equipped with certain inboard aileron hinge brackets. This AD requires you to repetitively inspect the affected inboard aileron hinge brackets for cracks or corrosion and replace them if found cracked or corroded. Replacement with aluminum brackets would terminate the need for the repetitive inspections. This AD results from several reports of cracks and corrosion found on the magnesium aileron hinge brackets. Magnesium is known to be susceptible to corrosion. We are issuing this AD to detect and correct corrosion damage to the inboard aileron hinge brackets. Such damage could result in the brackets cracking across the bearing boss and could lead to the aileron separating from the airplane with consequent reduced or loss of control of the airplane.
Which aircraft AD 2004-21-08 applies to
Whether AD 2004-21-08 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.