Airworthiness Directive 04-21649
one-timeAirworthiness Directives; Boeing Model 707 and 720 Series Airplanes
What this AD requires
This amendment adopts a new airworthiness directive (AD), applicable to all Boeing Model 707 and 720 series airplanes, that requires an inspection of the main landing gear (MLG) lock support fitting and the wing fillet flap support link for damage, and corrective action, if necessary; and replacement of the bolts and bushings at the joint between the MLG lock support fitting and the wing fillet flap support link. This action is necessary to prevent stress corrosion cracking of the bolts and wearing of the joint between the lock support fitting and the support link, which could lead to failure of the joint and could cause the collapse of the MLG. This action is intended to address the identified unsafe condition.
Which aircraft AD 04-21649 applies to
applicability derived from the AD summary — confirm the model/serial from the records
Whether AD 04-21649 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.