Airworthiness Directive 2004-18-01
recurringAirworthiness Directives; Hoffmann Propeller GmbH & Co KG Models HO-V343 and HO-V343K Propellers
What this AD requires
The FAA is adopting a new airworthiness directive (AD) for Hoffmann Propeller GmbH & Co KG (Hoffmann Propeller) models HO-V343 and HO-V343K propellers. This AD requires initial and repetitive visual inspections of propeller blades for blade shake and blade nut preload. This AD also requires initial and repetitive eddy current inspections of blade hubs for damage and cracks. This AD results from a report of a blade separating from either a model HO-V343 or HO-V343K propeller. We are issuing this AD to prevent propeller hub failure and blade separation due to an unknown root cause, leading to damage and possible loss of control of the airplane.
Which aircraft AD 2004-18-01 applies to
Installed on, but not limited to, general aviation airplanes, possibly under an FAA-approved Supplemental Type Certificate.
Whether AD 2004-18-01 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.