Is AD 2004-17-01 a recurring Airworthiness Directive?

Yes — AD 2004-17-01 requires a repetitive inspection. Next-due depends on the aircraft's time in service.

Which aircraft does AD 2004-17-01 apply to?

AD 2004-17-01 applies to Cessna Aircraft Company — models 208, 208B. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2004-17-01

recurring

Official AD 2004-17-01 · FR doc 04-18554 · 2004-08-13 · airframe

Airworthiness Directives; Cessna Aircraft Company Models 208 and 208B Airplanes

What this AD requires

The FAA supersedes Airworthiness Directive (AD) AD 2002-22-17, which applies to all Cessna Aircraft Company (Cessna) Models 208 and 208B airplanes; and AD 2003-21-04, which applies to certain Cessna Models 208 and 208B airplanes. This AD requires you to repetitively inspect the flap bellcranks for cracks and eventually replace these bellcranks. The installation of a newly designed bellcrank to increase the life limits is terminating action for the repetitive inspections. This AD is the result of these developments: Since FAA issued AD 2002- 22-17 and AD 2003-21-04, Cessna designed a new flap bell crank with a life limit of 40,000 landings instead of 7,000 landings. Also, FAA has done more analysis and examination of cracks and missing/incomplete welds in all of the bell cranks. This failure could lead to damage to the flap system and surrounding structure and result in reduced or loss of control of the airplane.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2004-17-01 applies to

MakesCessna Aircraft Company

Models208, 208B

Whether AD 2004-17-01 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2004-17-01 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.