Airworthiness Directive 04-17982

one-time
AD 04-17982 · 2004-08-09 · airframe

Airworthiness Directives; Boeing Model 757 and 767 Series Airplanes

What this AD requires

This amendment adopts a new airworthiness directive (AD), applicable to certain Boeing Model 757 and 767 series airplanes, that requires inspection to determine the serial number of the hydraulic pump in the ram air turbine (RAT), and corrective action if necessary. This action is necessary to prevent a cracked hanger arm of the hydraulic pump of the RAT that can fracture under load and lead to failure of the RAT to provide hydraulic power to the primary flight control system during an emergency when both engines have failed. Loss of hydraulic power to the primary flight controls could result in loss of control of the airplane. This action is intended to address the identified unsafe condition.

Which aircraft AD 04-17982 applies to

MakesBoeing
Models767

certain

Whether AD 04-17982 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of complianceThe specific action taken (inspected, replaced, modified) and to what revision.
DateWhen the work was done.
Aircraft timeTotal time in service / tach at compliance — how recurring next-due is computed.
Signature & certificateThe A&P/IA who returned it to service, with certificate number.
Is AD 04-17982 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.