Airworthiness Directive 2004-12-11
one-timeAirworthiness Directives; Pilatus Aircraft Ltd. Models PC-12 and PC-12/45 Airplanes
What this AD requires
The FAA adopts a new airworthiness directive (AD) for all Pilatus Aircraft Ltd. (Pilatus) Models PC-12 and PC-12/45 airplanes. This AD requires you to check the airplane logbook to determine whether certain inboard and outboard flap flexshafts have been replaced with parts of improved design. If the parts of improved design are not installed, you are required to replace certain inboard and/or outboard flap flexshafts with the parts of improved design. The pilot is allowed to do the logbook check. If the pilot can positively determine that the parts of improved design are installed, no further action is required. This AD is the result of mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Switzerland. We are issuing this AD to prevent rupture of the flap flexshafts due to corrosion, which could cause the flap system to become inoperable.
Which aircraft AD 2004-12-11 applies to
Whether AD 2004-12-11 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.