TailplateTailplate
Run a report

Airworthiness Directive 04-10251

recurring
AD 04-10251 · 2004-05-11 · airframe

Airworthiness Directives; Boeing Model 747-400 and 747-400D Series Airplanes

What this AD requires

This amendment adopts a new airworthiness directive (AD), applicable to certain Boeing Model 747-400 and 747-400D series airplanes, that requires a detailed inspection of the fire extinguishing system tube and clamp for correct installation or a repetitive pressure test of the fire extinguishing system tube for leakage, and corrective action, if necessary. This action is necessary to prevent a chafed hole in the fire extinguishing system tube of the aft cargo compartment, which could result in a lack of fire extinguishing agent and consequent uncontained fire in the aft cargo compartment. This action is intended to address the identified unsafe condition.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 04-10251 applies to

MakesBoeing
Models747-400D

certain

Whether AD 04-10251 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 04-10251 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.