Airworthiness Directive 03-9691
recurringAirworthiness Directives; Boeing Model 747-100, -200B, -200F, -200C, -100B, -300, -100B SUD, -400, -400D, and -400F Series Airplanes; and Model 747SR Series Airplanes
What this AD requires
This amendment adopts a new airworthiness directive (AD) that is applicable to all Boeing Model 747-100, -200B, -200F, -200C, -100B, -300, -100B SUD, -400, -400D, and -400F series airplanes; and Model 747SR series airplanes. This action requires repetitive inspections to detect discrepancies of the actuator attach fittings of the inboard and outboard flaps, and follow-on and corrective actions as necessary. This action is necessary to detect and correct cracking and other damage of the actuator attach fittings of the trailing edge flaps, which could result in abnormal operation or retraction of a trailing edge flap, and possible loss of controllability of the airplane. This action is intended to address the identified unsafe condition.
Which aircraft AD 03-9691 applies to
applicability derived from the AD summary — confirm the model/serial from the records
Whether AD 03-9691 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.