Airworthiness Directive 03-4165

recurring
AD 03-4165 · 2003-03-04 · airframe

Airworthiness Directives; Fokker Model F.28 Mark 1000, 2000, 3000, and 4000 Series Airplanes

What this AD requires

This amendment adopts a new airworthiness directive (AD), applicable to all Fokker Model F.28 Mark 1000, 2000, 3000, and 4000 series airplanes, that requires repetitive inspections for discrepancies of the internal fuselage skin panels located in the stub wing areas; and corrective action if necessary. This action is necessary to detect and correct heat damage to the fuselage skin panels caused by the leakage of hot air from one of the bleed air ducts inside the stub wing, which could result in reduced structural integrity of the engine support structure. This action is intended to address the identified unsafe condition.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 03-4165 applies to

MakesFokker
Models2000, 3000, 4000

applicability derived from the AD summary — confirm the model/serial from the records

Whether AD 03-4165 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of complianceThe specific action taken (inspected, replaced, modified) and to what revision.
DateWhen the work was done.
Aircraft timeTotal time in service / tach at compliance — how recurring next-due is computed.
Signature & certificateThe A&P/IA who returned it to service, with certificate number.
Is AD 03-4165 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.