Airworthiness Directive 03-16
one-timeAirworthiness Directives; Fokker Model F.28 Mark 0070 and 0100 Series Airplanes
What this AD requires
This amendment adopts a new airworthiness directive (AD), applicable to all Fokker Model F.28 Mark 0070 and 0100 series airplanes, that requires measurement of the over-center force of the thrust reverser operating levers, a functional test of the secondary lock solenoid of the thrust reversers, and corrective actions if necessary. The actions specified by this AD are intended to detect and correct an insufficient over-center force in the corresponding thrust reverser operating lever, and incorrect setting of the thrust reverser selector switch (S9), which could result in uncommanded deployment of the thrust reversers during flight and consequent reduced controllability of the airplane. This AD is intended to address the identified unsafe condition.
Which aircraft AD 03-16 applies to
applicability derived from the AD summary — confirm the model/serial from the records
Whether AD 03-16 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.