Airworthiness Directive 2003-11-23
recurringAirworthiness Directives; International Aero Engines AG (IAE) V2522-A5, V2524-A5, V2527-A5, V2527E-A5, V2527M-A5, and V2530-A5 Turbofan Engines
What this AD requires
The FAA is adopting a new airworthiness directive (AD) for certain IAE V2522-A5, V2524-A5, V2527-A5, V2527E-A5, V2527M-A5, and V2530-A5 turbofan engines. This AD requires initial and repetitive inspections of the master magnetic chip detector (MCD) or the No. 1, 2, 3 bearing chamber MCD. This AD is prompted by reports of No. 3 bearing failures that resulted in in-flight engine shutdowns (IFSDs) and significant smoke in the cockpit and cabin. The actions specified in this AD are intended to prevent failure of the No. 3 bearing, which could result in IFSDs and smoke in the cockpit and cabin.
Which aircraft AD 2003-11-23 applies to
Whether AD 2003-11-23 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.