Airworthiness Directive 03-12843
one-timeAirworthiness Directives; Raytheon Model Beech 400A and 400T Series Airplanes
What this AD requires
This amendment adopts a new airworthiness directive (AD), applicable to certain Raytheon Model Beech 400A and 400T series airplanes, that requires replacement of the low-pressure oxygen tubing located in the forward fuselage (nose avionics bay), lower forward flight deck, and lower forward cabin areas, as applicable, with new low-pressure oxygen tubing. This action is necessary to prevent leakage of oxygen from scored low-pressure oxygen tubing, which could result in lack of available oxygen for the flightcrew, or possible explosion or fire. This action is intended to address the identified unsafe condition.
Which aircraft AD 03-12843 applies to
Requires replacement of low-pressure oxygen tubing in the forward fuselage/nose avionics bay and lower forward flight deck/cabin areas per Raytheon SB 35-3406 (Part I for Model 400A, Part II for Model 400T); applies regardless of prior modification/repair, with an AMOC process available.
Whether AD 03-12843 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.