Airworthiness Directive 01-30197
one-timeAirworthiness Directives; McDonnell Douglas Model DC-10 Series Airplanes, and Model MD-10-10F and -30F Series Airplanes
What this AD requires
This amendment supersedes an existing airworthiness directive (AD), applicable to all McDonnell Douglas Model DC-10 series airplanes, that currently requires a one-time detailed visual inspection to determine if wire segments of the wire bundle routed through the feed through on the aft side of the flight engineer's station are damaged or chafed, and corrective actions, if necessary. This amendment also requires revising the wire bundle support clamp installation at the flight engineer's station. This action is necessary to prevent chafing of the wire bundle located behind the flight engineer's panel caused by the wire bundle coming in contact with the lower edge of the feed through and consequent electrical arcing, which could result in smoke and fire in the cockpit. This action is intended to address the identified unsafe condition.
Which aircraft AD 01-30197 applies to
applicability derived from the AD summary — confirm the model/serial from the records
Whether AD 01-30197 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.