Is AD 01-16739 a recurring Airworthiness Directive?

Yes — AD 01-16739 requires a repetitive inspection. Next-due depends on the aircraft's time in service.

Which aircraft does AD 01-16739 apply to?

AD 01-16739 applies to Mcdonnell Douglas — models MD-10-10F, MD-10-30F. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 01-16739

recurring

AD 01-16739 · 2001-07-05 · airframe

Airworthiness Directives; McDonnell Douglas Model DC-10-10, -15, -30, -30F (KC-10A Military), and -40 Series Airplanes; and Model MD-10-10F and MD-10-30F Series Airplanes

What this AD requires

This amendment supersedes an existing airworthiness directive (AD), applicable to certain McDonnell Douglas Model DC-10-10, -15, -30, -30F (KC-10A military), and -40 series airplanes; and Model MD-10-10F and MD-10-30F series airplanes, that currently requires, among other actions, performing repetitive ultrasonic inspections of the attaching bolts on the inboard and outboard support on the inboard and outboard flap assembly to detect failed bolts, or verifying the torque of the attaching bolts on the inboard support on the outboard flap; and follow-on actions. This amendment, among other actions, adds a requirement to verify the torque of the attaching bolts on the outboard support on the inboard and outboard flaps, and allows repetitive torque verifications. This amendment is prompted by a review that revealed inadvertent omission of a requirement. The actions specified by this AD are intended to prevent in-flight loss of inboard and outboard flap assemblies due to failure of H-11 attaching bolts, which could result in reduced controllability of the airplane.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 01-16739 applies to

MakesMcdonnell Douglas

ModelsMD-10-10F, MD-10-30F

certain

Whether AD 01-16739 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 01-16739 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.