TailplateTailplate
Run a report

Airworthiness Directive 01-15933

recurring
AD 01-15933 · 2001-06-27 · airframe

Airworthiness Directives; Boeing Model 747-100, -200, -300, and 747SP Series Airplanes

What this AD requires

This amendment adopts a new airworthiness directive (AD); applicable to certain Boeing Model 747-100, -200, -300, and 747SP series airplanes; that requires certain inspections to find missing and alloy-steel taperlock fasteners (bolts) in the diagonal brace underwing fittings; and corrective actions, if necessary. For airplanes with missing or alloy-steel fasteners, this AD also mandates replacement of certain fasteners with new fasteners, which constitutes terminating action for the repetitive inspections. This action is necessary to prevent loss of the underwing fitting load path due to missing or damaged alloy-steel taperlock fasteners, which could result in separation of the engine and strut from the airplane. This action is intended to address the identified unsafe condition.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 01-15933 applies to

MakesBoeing
Models747SP

certain

Whether AD 01-15933 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 01-15933 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.