Airworthiness Directive 2001-09-07
one-timeAirworthiness Directives; Pratt and Whitney PW4000 Series Turbofan Engines
What this AD requires
This amendment supersedes an emergency airworthiness directive (AD) 2001-08-52 that was sent previously to all known U.S. owners and operators of Pratt and Whitney (PW) model PW4050, PW4052, PW4056, PW4060, PW4060A, PW4060C, PW4062, PW4152, PW4156, PW4156A, PW4158, PW4160, PW4460, PW4462, and PW4650 turbofan engines by individual letters. That emergency AD requires limiting the number of PW4000 engines, listed by serial number (SN) in that AD, with potentially reduced stability to no more than one engine on each airplane; removal of certain PW4000 engines, listed by SN in this AD, before exceeding cyclic limits that are determined by airplane model; removal of certain PW4000 engines, listed by SN in this AD, that have a high pressure compressor with 1,500 or more cycles-since-overhaul (CSO) greater than the high pressure turbine (HPT) CSO; and requires a minimum rebuild standard for engines that are returned to service. This amendment supersedes emergency AD 2001-08-52 to provide clarifications and additions to the compliance and applicability of certain paragraphs of AD 2001-08-52. This AD is prompted by a report of a dual-engine surge event during take-off on an Airbus Industrie A300 airplane. The actions specified by this AD are intended to prevent multiple-engine power losses due to high pressure compressor (HPC) surge at a critical phase of flight such as takeoff or climb.
Which aircraft AD 2001-09-07 applies to
Applies to specific PW4000 engines identified by serial number in AD Table 1 (Suspected High Surge Rate Engines) and Table 2 (Engines Restricted from Installation with Suspected High Surge Rate Engines); limits Table 1 engines to no more than one per airplane and restricts co-installation with Table 2 engines or engines incorporating the HPC Cutback Stator (CBS) configuration per PW4ENG 72-706 Revision 3, PW4ENG 72-711, or PW4ENG 72-704.
Whether AD 2001-09-07 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.