Airworthiness Directive 00-8814

one-time
AD 00-8814 · 2000-04-14 · airframe

Airworthiness Directives; McDonnell Douglas Model MD-11 and MD-11F Series Airplanes

What this AD requires

This amendment adopts a new airworthiness directive (AD), applicable to certain McDonnell Douglas Model MD-11 and MD-11F series airplanes, that requires a one-time detailed visual inspection of the generator power feeder wires to detect chafed or damage wires; repair, if necessary; and a modification of the generator power feeder wire installation. This amendment is prompted by reports of generator power feeder wire chafing on the closeout rib of the wing leading edge at a certain station due to insufficient clearance between the generator power feeder wires and the closeout rib. The actions specified by this AD are intended to prevent chafed and burnt generator power feeder wires, which could result in arcing damage to a certain closeout rib of the wing leading edge and fire damage to the wing structure, and consequent reduced structural integrity of the wing.

Which aircraft AD 00-8814 applies to

ModelsMD-11F

certain

Whether AD 00-8814 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of complianceThe specific action taken (inspected, replaced, modified) and to what revision.
DateWhen the work was done.
Aircraft timeTotal time in service / tach at compliance — how recurring next-due is computed.
Signature & certificateThe A&P/IA who returned it to service, with certificate number.
Is AD 00-8814 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.