Airworthiness Directive 00-3797
recurringAirworthiness Directives; Boeing Model 747-100, -200, and 747SP Series Airplanes
What this AD requires
This amendment adopts a new airworthiness directive (AD), applicable to certain Boeing Model 747-100, -200, and 747SP series airplanes, that requires repetitive detailed visual and ultrasonic inspections to detect missing, damaged, or broken taperlock bolts in the diagonal brace underwing fittings; and corrective actions, if necessary. This AD also requires eventual replacement of the aft 10 taperlock bolts with new bolts, which constitutes terminating action for the repetitive inspections. This amendment is prompted by reports of damaged, broken, and corroded taperlock bolts of the diagonal brace underwing fittings on the outboard strut due to stress corrosion cracking. The actions specified by this AD are intended to prevent loss of the underwing fitting load path due to missing, damaged, or broken taperlock bolts, which could result in separation of the engine and strut from the airplane.
Which aircraft AD 00-3797 applies to
Whether AD 00-3797 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.