Is AD 00-19816 a recurring Airworthiness Directive?

No — AD 00-19816 is a one-time directive. Verify it was complied with in the aircraft's records.

Which aircraft does AD 00-19816 apply to?

AD 00-19816 applies to Mcdonnell Douglas — models DC-9-82, DC-9-83, MD-90-30. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 00-19816

one-time

AD 00-19816 · 2000-08-08 · airframe

Airworthiness Directives; McDonnell Douglas Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83), and DC-9-87 (MD-87); Model MD-88 Airplanes; and Model MD-90-30 Series Airplanes

What this AD requires

This amendment adopts a new airworthiness directive (AD), applicable to certain McDonnell Douglas Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83), and DC-9-87 (MD-87); Model MD-88 airplanes; and Model MD-90-30 series airplanes; that requires installation of a pipe support and clamps on the hydraulic lines in the aft fuselage; replacement of the hydraulic pipe assembly in the aft fuselage with a new pipe assembly; and installation of drain tube assemblies and diverter assemblies in the area of the auxiliary power unit (APU) inlet; as applicable. This amendment is prompted by reports of smoke and odor in the passenger cabin and cockpit due to hydraulic fluid leaking into the APU inlet, and subsequently, into the air conditioning system. The actions specified by this AD are intended to prevent such hydraulic fluid leakage due to fatigue vibration and cracking in the flared radius of a hydraulic pipe in the aft fuselage, which could result in smoke and odors in the passenger cabin or cockpit.

Which aircraft AD 00-19816 applies to

MakesMcdonnell Douglas

ModelsDC-9-82, DC-9-83, MD-90-30

certain

Whether AD 00-19816 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 00-19816 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.